Into the Seams of Alice – Down the Hole Dress – Part 1: The Bodice
Into the Seams of Alice – Down the Hole Dress – Part 1: The Bodice

Into the Seams of Alice – Down the Hole Dress – Part 1: The Bodice

aliceinwonderland-144

Follow me down the White Rabbit’s hole to discover the details of my Alice in Wonderland Costume Replica!

Read my last post to see multiple photos of the finished dress and hear the story behind this creation.  Now, let’s scurry down to learn about the process!

img_0784-2

~ The Bodice ~

While researching the “Down the Hole” Alice dress for my recreation, I uncovered lots of details in the bodice that had gone unnoticed when I first looked at the dress.  But if it wasn’t there, it’d be quite noticeable.

The fabric I used for the bodice and skirt is Silk Organza (found here, color #5060) and poly dress taffeta (found here).

img_0731
One of my favorite details ~ Cluny Lace edging on the solid edges of the bodice.  This lace also edges the sheer layer and contains the cording. Photo of the original detail below.

305a1f957a7dd07ca32a464b95ddf756

img_0733
Back view of the seam between the solid and sheer sections of the bodice including the lace edging.
img_0708
Half inch, corded, piping ready for application!

img_0736

img_0753
All the piping pinned in place, ready to be sewn.
img_0757
Sewing the piping on the separate pattern pieces will provide you with a line of stitches to follow when sewing the pieces together.  This will give a nice, even piping on the outside!

img_0767

img_0773
And there it is! Perfectly even piping peaking through the front seam.

img_0775

img_0784-2
All sewn together and ready for the sleeves.
img_0800
Two of those “unnoticed” details are on the sleeve.  1) Loose smocking at the top of the sleeve.  2) Swiss dot netting under the sleeve.  Photo of original dress below.

aliceblue7

img_0801
Don’t these 3 pin tucks add just the perfect detail?  Also, notice the edge of the sleeve being gathered by a thin elastic cord.

img_0809More piping detail along the armhole.

img_0816

img_0828
A total of 14 hooks & eyes were sewn on the front of the bodice.  Each placement of the hook & eyes corresponds with the 14 buttons.
img_0844
Sewing on these amazing replica buttons made of shell with an etched floral design. Thanks to Costumers Guide for directing me to them.  Here’s the link (I used size 16).
img_0852
After searching high and low for replica lace for the neckline of the bodice, I landed upon this flower lace design.  Though it’s not a perfect replica, I think it works fairly well.  Here’s the link.  I sewed the lace on English netting and then onto the solid layer of the bodice.  Photo of original dress below.

a0b002d838f7479337ce393d823c71b7

img_0860

img_0865
Threading thin satin cording through the Cluny lace on the outer edge of the sheer layer.
img_0872
The final step for the bodice ~ thread navy blue satin ribbon though the flowers.

aliceinwonderland-200
aliceinwonderland-11

I hope you enjoyed the journey; join me on this post where we’ll travel another rabbit trail and you’ll discover the details of the skirt!

Thanks for looking and learning with me!

7 Comments

  1. Pingback: Alice in Wonderland – Live Action 2010 – Costume Remake – Bella Maes Sewing Corner

Leave a Reply

Your email address will not be published. Required fields are marked *